CBI Additive Jet Fuel Injection System
in CSC Approved 20´ Container
AUTOMATETD INJECTION
The CBI Additive Injection Container has been developed specifically for military purposes and over the past decade it has proven its stability in harsh conditions around the world, in which all the components has been working flawlessly.
The unit has been developed in accordance with NATO specifications and has been approved by NATO (NATO Code 4235-22-607-9088t) for use with Aviation type Turbine Fuels (Kerosene) such as
- NATO F-34 (JP-8)
- NATO F35
- JP-8+100 (B-fluid)
VERSATILITY
All the fuel injection equipment is fitted into a standard CSC approved (ISO 668, ISO 1161) container. Access is provided through a personnel door for the daily operation, two standard container doors in one end to get easy access to the container, and a doule door on the side to allow access for pallet tanks (1,000 liter) by forklift, Furthermore, there is a window to oversee the operation.
Additonal to the two 1000 liter pallet tanks there is a bracket for one 200 liter Drum with Corrosion Inhibitor; a 20 liter drum of SDA Stadis and a sump inside the container to take up any spillage of additives from the tanks or drums. The sump can be fitted with a drain valve.
The container is insulated with 45 mm pre-insulated plates covered with alumimum sheets and have self-regulated electrical heating elements (EEx) and light (Ex) installed with an EU connection outside the container.
- NATO F-34 (JP-8)
- NATO F35
- JP-8+100 (B-fluid)
- Flashpoint Max +38 deg. C
- Electrical installations EEx / Ex T3
- Freezing Point Max +47oC
- Min product flow 30 m3/h
- Max product flow 150 m3/h
- Max operational pressure 10 bar
- Max additive viscosity 120 Cst actual
Additives that can be injected
- FSll anti-icing additive
- Corrosion inhibitor
- SDA Stadis 450
- S-1750
- Others on request
The CBI Additive Injection System will produce on-specification jet fuel at up to 250 cbm/Hour.
The system provides ease of operation, low maintenance and is built in a rugged design that has proven itself in hotspots around the world.
Injection Additives
Additive one
FSll anti-icing additive ≤ 2.000 PPM
Additive two
Corrosion inhibitor ≤ 120 PPM
Additive three
SDA Stadis 450 ≤ 36 PPM
Other injection options available